• CombinationLap/Shoulder
BeltwithSlidingLatchPlate
This belt has a latchplate that
slides freely along the belt.
This belt MUSTbe converted to prevent
movement of the lap portion of the belt.You
must use the lockingclipprovided with the
infant restraint, unless your vehicle's seat belt
can be converted in another way as described in
your vehicle owner's manual.
ToInstall Locking Clip:
1. Tightenthe buckled belt by pushing down
hard on the infant restraint and pulling
hard on the shoulder belt.
2. While pushing down on infant restraint,
pinch the two straps together behind the
buckle tongue. Unbuckle the belt
without allowing it to slip.
3. Connect lap and shoulder belts
with locking clip as shown
and .
4. Rebuckle belt. Check that lap belt
does not move by pulling and
pushing hard on infant restraint.
If belt loosens or lengthens,
repeat procedure.
Locking clip
½
inch
Locking clip goes here,
1/2inchfrom the buckle
24