6.1.1 |
|
1. From back, push harness anchor |
|
buckle back through harness slot. |
|
If necessary, from front, use harness |
|
strap to pull buckle from slot ➊. | Harness |
| tightener |
2.Reinsert harness anchor buckle in the appropriate slot ➋.
3.From back, remove harness strap from harness tightener. If necessary, from front, use harness strap to pull strap from slot.
4.Reinsert strap in the appropriate slot. Thread strap through tightener exactly as shown ➌.
5.SAFETY CHECK:
a)CHECK that straps are not twisted;
b)CHECK that straps are secure: pull on harness straps from front.
c)CHECK that harness anchor buckle is snapped flat against back as shown ➍.
➊
Harnessbuckleanchor
➋
➌
➍
30
