2.Pair the Parent Unit with the Nursery Unit
• If the Parent Unit is not on, turn it on now.
• The Parent Unit will display “Looking for a Nursery Unit to pair with. Turn on your Nursery Unit now.”
• Place the Nursery Unit in the same room, as the Par- ent Unit.
• Turn on the Nursery Unit using the On/Off Button on the side. The green power light should come on.
• Within a few seconds, the Parent Unit will find the
Nursery Unit. The Parent Unit will display “Nursery
Unit found. Pairing complete.”
• The Parent Unit will begin monitoring normally.
Nothing happened when I turned on the Nursery Unit. What do I do?
•With the Parent Unit on, turn the Nursery Unit off, and then on again.
•If there is still a problem, repeat steps 1 and 2.
35
