Graco 287834 Grease piston rod 222 packings and top edge of sleeve 220

3.Grease piston rod (222) packings and top edge of sleeve (220).

222

220

ti7898a

4.Carefully slide piston rod assembly (222) into top edge of sleeve (220).

222

220

ti7896a

5.Grease top inch or two of piston rod (222) that will go through the cylinder throat packings.

222

ti7897a

Service

6.Grease o-ring (207) and place on sleeve. Slide one o-ring (207) inside cylinder (205). Slide sleeve/pis- ton rod assembly (222) into bottom of cylinder.

207

222

205

ti7895a207

7.Install male gland (204) in cylinder (205).

8.Alternately stack UHMWPE packings (238) and leather packings (237) (note orientation).

9.Place female gland (217) in top of cylinder. Loosely install packing nut (202) and plug (201).

	201
	202
		217
237	238
Lips Down	Lips Down
	204

222

205

ti7884a

311485J 7