Warnings
WARNING
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
DThis equipment is for professional use only.
DRead all instruction manuals, tags, and labels before operating the equipment.
DUse the equipment only for its intended purpose. If you are not sure, call your Graco distributor.
DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.
DCheck equipment daily. Repair or replace worn or damaged parts immediately.
DDo not exceed the maximum working pressure stated on the equipment or in the Technical Data section for your equipment. Do not exceed the maximum working pressure of the lowest rated component in your system.
DUse fluids and solvents that are compatible with the equipment wetted parts. Refer to the Tech- nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warn- ings.
DHandle hoses carefully. Do not pull on hoses to move equipment.
DAll fluid hoses must have spring guards on both ends. The spring guards help protect the hose from kinks or bends at or close to the coupling, which can result in hose rupture.
DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 82_C (180_F) or below
DDo not lift pressurized equipment.
DComply with all applicable local, state, and national fire, electrical, and safety regulations.
DBe sure you know the maximum working pressure of the flexible nozzle you are using. Never use a flexible nozzle designed for low pressure dispensing valves or
DDo not modify any part of the dispensing valve; doing so could cause a malfunction and result in serious bodily injury. Be sure the dispensing valve has a maximum working pressure that meets or exceeds that of the pump.
DThe maximum fluid working pressure of these pumps, when operated at a maximum of 180 psi (1.2 MPa, 12 bar) air pressure is 900 psi (6.2 MPa, 62 bar).
2 307884
