Graco 307884S important safety instructions See Parts Drawing on

Installation

The typical installation shown in Fig. 2 is only an installation guide; it is not an actual system design. Contact your Graco distributor for assistance in designing a system to suit your needs.

D

G

C B

		A
E	K
KEY	F	H

AFluid dispense line

BPump ground wire

CAir regulator

DMain air supply line

EAir filter

FPump lubricator

GPump runaway valve

HMeter

KBleed-type master air valve

Fig. 2 04044B

See Parts Drawing on page 10

Place an open 16-gallon (60-liter) steel drum (J) on the base (3).

Secure the drum with the hold down clamps (3c) and hex head bolts (3c).

Place the drum cover (4) on the drum, and fasten it with the screws and washers provided. Carefully guide the pump riser tube through the mounting gasket. Refer to the assembled view of Model 225728 on the front cover.

307884 5