Repair
28 309295N
Electrode Replacement
1. Prepare the gun for service, page 25.
2. Remove the air cap assembly, page 26.
3. Pull the electrode (9b) out of the back of the air cap,
using a needle-nose pliers.
4. Push the new electrode through the air cap hole.
Make sure the short end (BB) of the electrode
engages the hole (CC) in the back of the air cap.
Press the electrode in place firmly with your fingers.
See FIG. 10.
5. Install the air cap assembly, page 26.
6. Test gun resistance, page 18.
Fig. 10. Electrode Replacement
WARN ING
Electric Shock Hazard
To reduce the risk of fire, explosion, or elec-
tric shock, do not operate the spray gun
without the electrode installed in the air cap.
02013
BB
CC
9b