Installation
Mounting Heater
• The heater has a surface temperature of T2 (482°F, 250°C). Follow temperature code when locating heater. See Technical Data, page 28, for more temperature code informa- tion.
•Heater controls must be easily accessible.
•The mounting surface must be able to support the weight of the heater and fluid, and any stress caused during operation.
Wall Mounting
Need wall bracket 192585 or 183982. See Acces- sories, page 26.
Use wall bracket as a template to mark bolt holes.
Bracket 192585
(FIG. 3)
Bracket depth provides required solid object clearance to comply with European flame proof standards.
1.Use M8 bolts of appropriate length and lockwasher (CC), not supplied, to mount bracket.
2.Install two screws (6) and washers (5) into top 2 heater mounting posts (BB) until they are about 1/8 in. (3 mm) from fully installed.
3.Lift heater and slide two screw heads into bracket slots. Install remaining 2 screws and tighten all 4.
Bracket 183982
(FIG. 4)
1.Mount bracket (MM) to heater with screws (6) and lockwashers (5) supplied.
2.Use M8 bolts of the appropriate length and lock- washer (NN), not supplied, to secure the bracket to the wall.
6in.
152.4 mm
5 in.
127 mm
6
5
YY
CC
BB
FIG. 3: Bracket 192585
6 in.
152.4 mm
5 in.
127 mm
6
5
MM NN 
PP
FIG. 4: Bracket 183982
05442
8631A
8 | 309524N |
