Cleanup
ti5843a
ti5979a
|
| FLUSH |
| ti5963a |
|
| FLUSH | ti5840a |
|
| |
ti2895a |
|
|
Pump Armor | ti5973a | ti5984a |
Caution: If flushing with water, do | 13. Close prime valve. Trig- | 14. Install filter into fil- | 15. Clean tip, guard and |
not leave water in sprayer. Flush | ger gun into flushing pail | ter bowl. Make | gasket with a soft bristle |
again with mineral spirits, oil or | to purge fluid from hose. | sure plastic center | brush to prevent part |
Pump Armor and leave this protec- | Open prime valve. | tube is tightened | failure due to dried |
tive coating in the sprayer to help |
| securely. Hand | materials. Assemble |
prevent freezing or corrosion and |
| tighten filter bowl. | parts and attach loosely |
increase sprayer life. |
| Hand tighten gun | onto gun. |
|
| handle. |
|
|
|
| Wipe sprayer, hose and |
|
|
| gun with a rag soaked in |
|
|
| water or mineral spirits. |
26 | 310892F |
