![](/images/new-backgrounds/1302330/30233035x1.webp)
Startup
WatchDog™ Protection System
| T |
|
A C | ||
W |
| H |
| D | |
|
| |
|
| O |
|
| G |
|
| / |
|
| . |
|
| /&& |
ti6224a
ti6207a
Pump stops automatically when material pail is empty.
| T |
|
A C | ||
W |
| H |
| D | |
|
| |
|
| O |
G
/. /&&
ti6208a
PSI
SMARTCONTROL
BAR
PSI
ti6225a
Change Display Units:
To Activate:
1.Do Startup.
2.Turn WatchDog switch ON and WD ON dis- plays.
EMPTY displays / flashes and the pump stops when WatchDog protection system detects an empty mate- rial pail.
3.Turn WatchDog switch OFF. Add material or reprime sprayer. Turn pump switch OFF and ON to reset WatchDog protection system. Turn WatchDog switch back ON to continue to moni- tor material level.
Pressure/Volume:
Press and hold (8 seconds) DTS button to change pres- sure units (psi, bar, MPa), to desired units. Volume units (GAL, LTRx10) follow pres- sure units; i.e., psi/GAL and bar or MPa/LTRx10.
Continue to press DTS but- ton to cycle from psi to bar to MPa. Release DTS button to select units.
18 | 310892F |