![](/images/new-backgrounds/1328868/32886811x1.webp)
Installation
Typical Installation
The installation shown in FIG. 2 is only a guide for selecting and installing system components and accessories. Some of the equipment is required, as noted in the key. For assistance in designing a system to suit your needs, con- tact your Graco distributor.
Mount pump securely so it cannot move during operation.
F G H J K
E
D
C
B
A
FIG. 2
L M N
P
Q
R S
U
T
ti0477a |
Key:
AFollower plate
BWeep tube
CFluid outlet line (to gun)
DDrain valve (required)
EGround wire
FHydraulic return line, minimum 3/4 inch I.D. (required)
GHydraulic outlet, 3/4” npt (f)
HReturn line
JHydraulic inlet, 3/4” npt (m)
KTee, 3/4” npt
LSupply line
M*Pressure gauge
N*Pressure reducing valve (required in systems over 600
psi [4.1 MPa, 41 bar])
PAccumulator
Q*Flow control valve (required in systems over 3 gpm [11 lpm])
RHydraulic supply line
SCheck valve
TVariable volume pressure compensated pump
UHydraulic power supply
VDrain line, accumulator
*Included in Hydraulic Fluid Control Kit 247538 or 247705, which can be ordered separately.
6 | 312350K |