Installation
Connect Air Lines
Trapped air can cause the pump to cycle unexpectedly, which could result in serious injury from splashing or moving parts.
1.5:1 Monark pump only: Install air regulator kit (22).
2.10:1 President pump only: Remove 3/8 npt nipple from air regulator kit (22). Install reducing nipple (42) in air motor inlet and connect air regulator kit. See page 11.
3.Shut off air valves (V) at feed pumps (1).
256276 5:1 Pump Kit Shown
1
V
22
quick disconnect
5 r_256276_312769_2A
4.If only using a Monark 5:1 or T2 2:1 feed pump: Install air line (5) with quick disconnect coupler pro- vided.
5.For President 10:1 Pump only: connect air line and quick disconnect coupler, not included, to air regula- tor (22).
6.If only using an agitator:
a.Connect air line (55) and coupler (56) into fitting (54).
Shown in 20 gallon hopper.
A | 52 | |
B | 53 | |
H | 54 | |
56 | ||
|
55
r_256274_312769_2A
7.If using a feed pump and agitator:
a.For Monark 5:1 pump only: Interconnect tee fit- ting (2) and quick disconnect fitting (23) on pump with air hose (5).
256276 5:1 Pump Kit Shown
Shown in 20 gallon hopper.
23
54
2
55
5
ti18688a
8 | 312769D |
