Merkur Pump Assembly | Graco 312794E instruction

Instructions - Parts

Merkur® Pump Assembly

312794E

ENG

For high-performance finishing and coating applications in hazardous or non-hazardous locations. For professional use only.

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

See page 4 for model information, including maximum work- ing pressure.

TI12811a

ll 2 G

Image 1

Graco 312794E important safety instructions Merkur Pump Assembly, Ll 2 G

Contents

Ll 2 G Merkur Pump Assembly Contents Wet cup Ratio Pump Part Number MatrixData Monitoring/Exhaust Pump Models Fire and Explosion Hazard Manual Description Related Manuals Component Identification Key Component Identification General Information InstallationPrepare the Operator Prepare the Site Grounding Mount the Pump AccessoriesAir and Fluid Hoses G15 Spray Gun Shown with Supply Hose Typical Installation Flush Before Using Equipment Pressure Relief ProcedureOperation Wet Cup Shutdown and Care of the Pump Prime and Adjust the Pump Preventive Maintenance Schedule MaintenanceFollow Pressure Relief Procedure, Tighten Threaded Connections Problem Cause Solution Troubleshooting Repair Disconnect the Displacement Pump Displacement Pump Torque LW025A Reconnect the Displacement PumpLW050A-LW150A Reconnect the Air Motor Disconnect the Air MotorMotor Torque All Other Sizes Pump Parts Qty Parts That Vary by ModelDescription Repair Kits For displacement pump repair kits, see manual Model W10xxx Performance ChartsModel W15Axx Model W15Fxx Model W15BxxFlow Model W23xxx Model W18xxx Model W28xxx Model W24xxx Model W30Cxx Model W30AxxBar Model W45xxx Model W36xxx Ratio, 75 cc/cycle Model W48xxx Pump Model Weight Pump Dimensions Technical Data Wall Bracket Mounting Dimensions Graco Information Graco Standard Warranty