Accessories
26 3A0590G
Accessories10,000 psi Fluid Pressure Gauge (2.5 in)
114434 - 1/4 npt(m) back mount pressure gauge can be
used in ports as gun pressure gauge.
551387 - 1/4 npt bottom mount version.
High Pressure Hoses and Accessory
Fittings
See brochure 339361 for parts and accessories.
262522, Remote Mix Manifold Carriage
The carriage holds and protects the mix manifold
assembly. Use two screws (28) to mount the mix mani-
fold to the carriage.
15E592, 7250 psi Static Mixer Housing
3/8 npt(m) holds 1/2 in. 12 element plastic sticks.
511352, Mixer
Stainless 3/8 npt(m) pipe with 12 element stainless
welded stick; 7250 psi (50 MPa, 500 bar).
248927, Plastic Mix Elements
25 pack of 1/2 in. x 12 element plastic sticks.
B-side screen
40 mesh strainer for low viscosity fluids only.
15T630, Screen Installation Tool
Use to reinstall B-side screen.
24F375, Ratio Check Kit
Use to check ratio at mix manifold. See manual 3A0421
for instructions.
Accessory Ports
P1 and P2:
These 1/4 npt ports are located after “A” and “B” shutoff
handle.
Can be used for an inlet pressure gauge. These are
before the fluid check valves and hardener restrictor.
P3 and P5:
Can be used for a pressure gauge to measure outlet
pressure or check ratio with the 24F375 kit. These ports
are downstream of the check valve.
The P3 port is used as the second flush inlet on the
quickset model of the mix manifold. It flushes across the
resin check ball, but not through it.
P4:
Can be used for a pressure gauge to measure hardener
pressure before the restrictor, but after the check valve.
Ref.
No. Part No. Description Qty.
17 185416 STARINER, 40 mesh 1
18 121410 PACKING, screen retainer; PTFE 1
FIG. 4: Accessory Ports
P1
P3 P4
P5
r_258987_3a0590_9a
P2