Graco 3A2573D Open the gun’s solvent flush valve for gun #1 B or gun #2 E, E - Openb - Open

Flushing

5.Open the gun’s solvent flush valve for gun #1 (B) or gun #2 (E).

E - OPENB - OPEN

6.Unlock trigger lock and trigger gun into a grounded pail. Flush out mixed material until clean solvent dis- penses. Lock trigger lock.

Unlocked Locked

7.Shutoff solvent pump and close solvent valve for gun #1 (B) or gun #2 (E).

E - CLOSEB - CLOSE

8. Lock trigger lock.

Locked

9.Final Flush must be done from the proportioner’s mix manifold or while flushing your pre-mix sprayer, through the gun splitter to the gun. Follow Flushing procedure in your proportioner or sprayer manual.

NOTE: It is good practice to flush through each individ- ual flush line valve after flushing through the main inlet.

3A2573D 7