Repair
Repair
Prepare the Pump for Repair
1.Flush the pump if possible, page 11.
2.Relieve the pressure, page 10.
3.Disconnect the air and fluid hoses.
4.Remove the pump from its mounting and take it to the work bench.
General Repair Notes
• A qualified technician should make all repairs.
•Inspect and clean all parts thoroughly before reassembly.
•Use only genuine Graco replacement parts, available from your Graco distributor.
•Be careful not to damage sealing surfaces.
•Replace all
•Follow all lubrication, torque, and repair notes in the repair procedures.
•Do not use silicone or
Fault Indications
During operation, check for indications of worn or dam- aged parts, such as:
•major pressure fluctuations
•change in the pump’s operating sound
•irregular operation.
Always replace worn or damaged parts immediately to prevent additional damage.
Tools Required
•3, 4, and 6 mm allen wrenches
•12, 19, and 22 mm open end wrenches
•internal snap ring pliers
•
•needlenose pliers
•vise with soft jaws
311688D | 13 |