3.5 Attaching Canopy (on certain models)
1.Infant restraint comes with four (two on certain models) identical canopy support parts.
Thread one canopy support completely through one sewn tunnel ✁.
2.Slide straight end of a second
support into the straight end of the first support ✂.
✁
✂
3.On models with four canopy supports, repeat
steps one and two for the other canopy tunnel. The canopy should appear as shown ✃.
4.Attach canopy in the areas between the
infant restraint and the handle base ✄.
To remove canopy:
Pull the canopy fabric back.
With both thumbs on the center of the canopy bow, wiggle back and forth while pulling out on the two parts of the canopy bow ☎.
✃
✄
☎
14
