Step 3.
If your child is already in the safety seat because you have been using it as a carrier, make sure child is secured with the harness.
Always secure your child with the safety seat harness when using the safety seat in the stroller.
Step 4.
Move the safety seat handle into the carrying position.
Step 5.
Position the safety seat so that the mounting notches fit over the edge of the rear arm bar or front tray. Push down on the safety seat until attachment latch snaps onto the arm bar or tray.
Step 6.
Slide stroller seat belt webbing under vehicle belt hooks on each side of the safety seat. Tighten stroller seat belt buckles against inside of safety seat.
Step 7.
Pull up on safety seat handle to be sure the safety seat is securely attached to the stroller.
To remove safety seat from the stroller, remove stroller seat belts from vehicle belt hooks, squeeze release handle at back of safety seat, and lift safety seat out of the stroller.
To Fold Stroller
Before folding,
(1) remove safety seat if in use; (2) adjust seat backs to upright position; (3) lock brakes; (4) fold canopies and lower front canopy as shown.
Step 1.
Pull back both fold latches at handle. Begin pushing handle forward.
Step 2.
Hold stroller frame at base of front canopy and fold ends together until storage latch on side catches automatically.
Stroller will fold more compactly if tray and front canopy are removed and front wheels are facing backwards.
If rear wheels are locked, folded stroller will stand on its own.
To Remove Seat Pads
Front and rear seat pads can be removed if desired for cleaning or replacement.
Rear Seat Pad:
Unfasten the four snaps and three hook/loop tabs on each side, and the two snaps on back as shown. Push crotch strap and waist belt through slots in pad and remove pad.
13 | 14 |
