To Secure Your Child
Avoid serious injury from falling or sliding out. Always use seat belt.
Step 1.
Place crotch strap between child’s legs and snap both side buckles to the center buckle. Adjust belt as needed to get a snug fit around your child.
Step 2.
Push in on front of buckle to release.
To Change to Swivel or Non-swivel Wheels
Front swivel wheels lock for use on uneven surfaces such as grass, stones or gravel.
Before locking swivels, first push stroller forward a few feet to ensure that the wheels are correctly positioned.
Push buttons up or down, depending on model, to lock or release swivels. Turn swivel to check that it is locked or released.
To Adjust Backs
Step 1.
Push back of seat slightly forward while squeezing lever as shown to unlock.
Step 2.
Do not pull
on this bar! 
To Install Rear Canopy
Step 1.
Fully recline the rear seat. Locate small knobs on the inside of the
Adjust to desired position.
Rear seat has four positions, front seat has three. You may use any combination of seat positions.
Child may slip into leg openings and strangle.
NEVER use front seat in a reclined carriage position unless footrest is raised to cover the front opening and wire is snapped into lower notch.
handle.
Step 2.
Hold canopy by mounting brackets as shown. Push brackets in slightly and align holes in brackets with knobs on handle. Mount brackets onto knobs.
Knob
Step 3.
Slide brackets down to latch.
Be sure fabric is not caught under brackets.
Bracket
hole 
Knob
NEVER use rear seat in a reclined carriage position unless footrest opening behind front seat has first been closed by snapping the flap in six places to the back of the front seat.
Step 3.
Back of front seat
Rear seat
Step 4.
Snap canopy fabric to seat back.
To return seat back to a more upright position, push forward on back until it snaps into desired position. (Front seat middle position locks for
10
