Graco 7970, 7965, 7950, 7955 manual To Remove Rear Canopy, To Adjust Canopies, To Fold Stroller

To Remove Rear Canopy

Step 1.

Fully recline the rear seat.

Step 2.

Unsnap canopy fabric from stroller.

Step 3.

Slide both brackets up, then push brackets in slightly to remove canopy.

Slide up and

push in

To Adjust Canopies

Push or pull canopy to desired position.

Canopy bag (on certain models) carries a maximum of 2 pounds (0.9 kg).

To Fold Stroller

NOTE: Before folding,

(1)adjust backs to upright position;

(2)fold canopy; (3) align front wheels with frame.

To Install Front Canopy (found only on some models):

Step 1.
Fully recline the front seat.
Step 2.
Unsnap small flaps on top of
both armrests.
Step 3.
Make sure arrows on inside of
canopy bracket face toward the
front of stroller.
			Push
Step 4.	Push
Insert brackets through elastic,
then through holes on armrests
as shown.
Step 5.		Metal bar
Push both brackets down at the
same time onto stroller frame until
they snap into place. Brackets

must fit over metal bars on inside of frame. Be sure fabric is not caught under brackets.

Step 6.

Resnap small flaps on armrests when front canopy is not in use.

11

Step 1.

Push on rod to fold as shown.

Step 2.

Release secondary latch as shown.

Step 3.

Push handle forward.

Align front wheels

Step 4.

Lock latch.

12