Graco 8H98 owner manual Parts List, Reclining Adjustment, Shoulder harnesses Height Adjustment

Parts List

Fig. 1.1 5-point safety buckle Fig. 1.2 Harness adjuster

Fig. 1.3 Angle adjustment button Fig. 1.4 Secondary latch

Fig. 1.5 Top bar juncture

Fig. 1.6 Rear facing seat belt hook Fig. 1.7 Body

Fig. 1.8 Protective shoulder straps

Fig. 2.1	Rear facing seat belt
Fig. 2.2	Lock-off latch for forward
	facing mode
Fig. 2.3	Front belt cover
Fig. 2.4	Base
Fig. 2.5	Rear cover
Fig. 2.6	Instruction manual
Fig. 2.7	Harness height adjuster
	button
Fig. 3	Anti-slippery pad

Reclining Adjustment

After adjustment, please move the car seat back and forth to make sure if the car seat is securely fastened to the vehicle seat.

Forward Facing Mode (for child between 9~18kg)

There are four reclining angles 1~ 4 (Fig. 5). Simply press the angle adjustment button to adjust the car seat angles (Fig. 4) – Push up.

Rear Facing Mode (for child under 13kg)

Press the secondary latch first and then the reclining adjustment button (Fig. 6). Car seat installed in this mode MUST be adjusted to angle 5 (Fig. 5).

Beware of finger entrapment when performing this task.

Shoulder harnesses Height Adjustment

Improper adjustment of shoulder height may throw your child off the car seat when accident occurs.

Make sure the shoulder height is not too high or too low before installing this car seat.

1Open the rear cover located at the seat back (Fig. 7)

2Move the slide lever up or down by pressing the harness height adjuster button (Fig. 8). There are four pitches of shoulder height for adjustment.

3Adjust the shoulder harness to appropriate height of insertion outlet cover after the height adjustment (Fig. 10).

16