To Fold Changing Table
Step 1.
Pull up on waist belt straps to fold.
Step 2.
Ends of long tubes must point up when folded as shown.
Step 3.
To carry or store your changing table with your folded Pack ’N Play, see “To Cover Your Pack ’N Play” section in these instructions.
To Use Accessory Bag (on certain models)
Snap accessory bag onto end of Pack ’N Play with four snaps as shown.
To Fold Your Pack ’N Play®
Step 1.
Release the two VELCRO® straps under the Pack ’N Play, and remove the mattress.
Step 2.
IMPORTANT: Raise center halfway BEFORE unlocking rails.
Grasp center loop as shown and pull up approximately halfway to the top rails.
Step 3.
The top rail has a center piece with two tubes hidden under the fabric. The button on the bottom of the center piece releases the two tubes when it is pushed up.
Center
piece
Tube
Push UP button 
under fabric 
To fold the top rail:
!Lift up slightly on the top rail.
!Push up on the button located under the symbol
!to release the two tubes.
!Push down.
!If top rails do not unlatch, lift
!the center of the floor higher.
! Both tubes must be released
!for the top rail to fold.
Step 4.
Pull center up all the way.
9 | 10 |
