To Listen to Baby
•Turn on Nursery Unit using the On/Off Switch.
•Turn on one or both Parent Units using the On/Off Switch.
•The Sound Lights on the Parent Unit will illuminate as your child (or other objects) make noise near the Nursery Unit. Please note that the Sound Lights and volume control on the Parent Unit are independent of each other. With the volume turned all the way down, the Sound Lights will still illuminate as your child (or other objects) make noise near the Nursery Unit.
Changing the Volume
•The volume for each Nursery Unit is adjusted separately.
•Set the Room Select Switch to 1 or 2, to select Nursery Unit 1 or Nursery Unit 2.
•Adjust the volume of the selected Nursery Unit by pressing the Volume Up/Down Buttons.
•The Sound Lights illuminate as the volume button is pressed up or down to provide visual feedback of the volume level.
•The unit will beep louder or softer depending on the selected volume level.
•When no volume button has been pressed for two seconds, the unit will beep three times to indicate that the volume setting has been stored. The unit will return to normal monitoring.
Changing the Monitoring Time
•The time the Parent Unit monitors each Nursery Unit is adjusted separately.
•Set the Room Unit Select Switch to 1 or 2, to select Nursery Unit 1 or Nursery Unit 2.
•Press and hold the Time Adjust button.
•Adjust the time by pressing the Volume Up/Down Buttons.
•The Sound Lights illuminate as the volume but- ton is pressed up or down to show the selected time as shown.
•Release the Time Adjust Button. The unit will beep three times to indicate that the time setting has been stored. The unit will return to normal monitoring.
•Only one Nursery Unit can be set to Off at a time.
| 2 min |
| |
| 1 min |
| |
Orange | 30 sec | Green | |
Sound Lights | 10 sec | Sound Lights | |
for Nursery | for Nursery | ||
| |||
Unit 1 | OFF | Unit 2 |
Red Loss Connection LED
5
