Battery Installation, Using AC Adapters, Parent Unit

Battery Installation

Parent Unit

•The battery must be plugged into the Parent Unit before the

unit will be ready for use. Remove the battery door cover on the Parent Unit with a key or flat blade screw driver. Remove the battery pack from the packaging and plug into the back of the unit. Place the battery pack into the recess and press the wire into the slot on the side. Replace the battery door.

Nursery Unit

•Turn the unit over, and use screw driver to remove the battery door.

•Place 3-AAA (1.5V-LR03) batteries into the battery compartment. Note the proper orientation of the batteries.

•Place the battery door back on the unit and fasten the screw.

•Please remove a dead battery promptly. A dead battery left in the unit may leak, damaging your unit.

•Do not attempt to recharge a non-rechargeable battery.

•A rechargeable battery CANNOT be recharged by plugging the AC adapter into the Nursery Unit.

•Remove the batteries from the unit if it is no longer being used or will be stored for an extended period of time.

Plug in cord


-	+	-
+	-	+

Batteries should be disposed of properly by recycling.

Using AC Adapters

•The Parent Unit can use either the rechargeable battery that comes with the unit or standard 120 volt AC household current. The Nursery Unit uses 3-AAA (1.5V-LR03) batteries or standard 120 volt AC household current.

•To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the Parent Unit (under the

rubber cover) or the back of the Nursery Unit. If using the Docking Station, plug the AC adapter connector into the back of the Docking Station. The Parent Unit may now be placed in the Docking Station. Then plug the adapter into a standard wall out- let.

•Use ONLY the Graco adapters included with the unit. Do not use these adapters with other equipment under any circumstances.

•If units do not work, check that AC adapters are plugged into working outlets.

•When electricity is off (from a power failure, etc.), the Nursery Unit will operate on 3-AAA (1.5V-LR03) batteries. If the Power LED is not lit, turn the power off and then back on to the Nursery Unit. A green LED indicates that the batteries are fine. A red LED indicates that the batteries are low. If the LED does not light at all, then replace the batteries. The Parent Unit will operate if the rechargeable battery is charged.

Selecting Channels

•In case you are experiencing some interference, the channel on the Nursery Unit can be changed by pressing the Channel Button (labelled “ch”) on the side of the unit. The Parent Unit will automatically scan all of the available channels until it locks on to the Nursery Unit. If you are still experiencing interference, press the Channel Button on the side of the Nursery Unit up to 3 times until a good channel is found.

A5220, 2794, A3930 specifications

The Graco A3930,2794,A5220 is a versatile and innovative paint sprayer that has gained popularity among DIY enthusiasts and professionals alike. This model combines advanced technology with user-friendly features, making it an ideal choice for various painting applications.

One of the standout features of the Graco A3930,2794,A5220 is its powerful motor that provides a high flow rate. This capability ensures efficient coverage, making it suitable for larger projects such as fences, decks, and interior walls. With a maximum output of up to 0.47 gallons per minute, users can complete tasks faster and with less effort.

The sprayer is equipped with a stainless steel piston pump that allows for a consistent spray pattern, reducing the likelihood of clogging during operation. This pump technology helps deliver a smooth and professional finish, even when using thicker coatings such as latex paint, stain, and sealers. In addition, the adjustable pressure control allows users to customize the spray to suit their specific project requirements, offering versatility in applications ranging from fine finishes to heavy coatings.

Another innovative feature of the Graco A3930,2794,A5220 is its RAC IV tip technology. This reversible tip design provides convenience, enabling users to easily unclog the tip without the need for disassembly. The technology also improves control over the spray pattern, permitting precise coverage in hard-to-reach areas.

Portability is another key aspect of this model. The lightweight design, combined with an integrated carrying handle, allows users to maneuver the equipment with ease. Additionally, the included suction set allows for the use of paint directly from the container, minimizing cleanup time and material waste.

The Graco A3930,2794,A5220 features a user-friendly setup process, making it accessible even for those new to paint spraying. The instruction manual is clear and comprehensive, ensuring that users can quickly learn how to operate and maintain the equipment.

Durability is yet another characteristic of the Graco A3930,2794,A5220. Constructed with high-quality materials, this sprayer is built to withstand the rigors of frequent use, making it a reliable addition to any toolkit.

Overall, the Graco A3930,2794,A5220 stands out as a powerful and flexible paint sprayer, ideal for both professionals and homeowners seeking efficiency and quality in their painting projects. With its advanced features and durable design, it is a valuable investment for anyone looking to achieve a flawless finish.

Graco A5220, A3930, 2794 Battery Installation, Using AC Adapters, Selecting Channels, Parent Unit

Models: A5220 2794 A3930