Graco Forward Facing Child Restraint manual Belt must lay flat and not be twisted

1. Remove both LATCH connectors and the tether connector from the storage bars and extend LATCH to its maximum length for ease of installation.

2. Place the child restraint firmly against the back of a forward-facing vehicle seat with LATCH lower anchors.

3. Hook LATCH Connectors to vehicle lower anchors ➊. Pull firmly on Connectors to be sure they are attached ➋.

Belt must lay flat and not be twisted.

4.Tighten LATCH by pushing down hard on child restraint and pulling the adjustment belt ➌.

5.NEVER put two LATCH connectors on one vehicle LATCH anchor unless specifically allowed by the manufacturer ➍.

➊

➋

➌

➍