![](/images/new-backgrounds/1317653/317653207x1.webp)
6.2.1 3-Point Harness
5.Buckle harness to the latch between child’s legs. Make sure that you hear a “click.”
DO NOT use the infant restraint if the harness does not latch in place. Call Graco at
6. From the back, pull strap through harness tightener to tighten the straps as shown . CHECK that both straps are flat and tight on child’s shoulders.
7. Snap harness clip pieces together . Position harness clip in middle of chest, level with armpits and away from the neck .
8.SAFETY CHECK:
a)CHECK that harness straps are not twisted.
b)CHECK that the harness is snug. A
snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position .
32