6.2.1 3-Point Harness

5.Buckle harness to the latch between child’s legs. Make sure that you hear a “click.”

DO NOT use the infant restraint if the harness does not latch in place. Call Graco at 1-800-345-4109.

6.From the back, pull strap through

harness tightener to tighten the straps as shown . CHECK that both straps are flat and tight on child’s shoulders.

7.Snap harness clip pieces together . Position harness clip in middle of chest,

level with armpits and away from the neck .

8.SAFETY CHECK:

a)CHECK that harness straps are not twisted.

b)CHECK that the harness is snug. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s

flesh or push the child’s body into an unnatural position .







34

Page 74
Image 74
Graco ISPA273AB, 1752033 owner manual From the back, pull strap through, Level with armpits and away from the neck