TROUBLESHOOTING

Our Elliptical Trainers are designed to be reliable and easy to use. If, however, you have a problem, these troubleshooting steps may reveal the cause.

PROBLEM: The console does not light up.

SOLUTION: Check to make sure the power switch located on the backside of the console is turned on.

SOLUTION: Make sure the power adapter is plugged into the base of the Elliptical Trainer.

SOLUTION: Make sure the wire harness is plugged into the back of the console.

PROBLEM: You feel a thump or hitch in the stride motion.

SOLUTION: Check assembly and tightness of all hardware.

SOLUTION: Wipe off the roller wheels and tracks. They could have taken on debris that is causing the thump.

SOLUTION: Check the bolts and the bracket under the footplate. At times, these can be over-tightened which cause friction to the pivoting footplate and may lead to a thump or hitch.

NOTE: If the above steps fail to remedy the problem, discontinue use, turn the power off and contact your retailer.

ALL ELLIPTICALS

21

Page 25
Image 25
Vision Fitness R2250, E3200 manual Troubleshooting