ENGINEERING MODE
Engineering mode consists of 13 optional settings. Use the engineering mode to enable certain features or displays on your console.
ENTERING AND USING ENGINEERING MODE
•Press and hold the UP ▲ and DOWN ▼ keys for approximately three seconds.
•The console will beep and display engineering modes and optional settings. Use the UP ▲ or DOWN ▼ keys to scroll through the options. Press the ENTER key to select the appropriate mode or setting.
OPTIONALSETTINGS
S E T T I N G D E S C R I P T I O N
P R E M I E R
56
P1 – SET MAX TIME
P2 – SET USER TIME
P3 – SET USER AGE
P4 – SET WEIGHT
P5 – DEFAULT
RESISTANCE LEVEL
P6 – DEFAULT LANGUAGE
P7 – UNIT
P8 – MACHINE TYPE
P9 – ACCUMULATED DATA
P10 – DISPLAY TEST
P11 – HARDWARE TEST
P12 – BEEPER MODE
P13 – VERSION
ALLOWS YOU TO SET THE MAXIMUM TIME A PROGRAM CAN RUN FOR.
ALLOWSYOUTOSETTHETIMETHATTHECOMPUTERWILLDEFAULTTOFORALLPROGRAMS.
ALLOWS YOU TO SET THE AGE THAT THE COMPUTER WILL DEFAULT TO DURING SETUP.
ALLOWSYOUTOSETTHEWEIGHTTHATTHECOMPUTERWILLDEFAULTTODURINGSETUP.
ALLOWSYOUTOSETTHERESISTANCELEVELTHATTHECOMPUTERWILLDEFAULTTOFOR ALL PROGRAMS.
ALLOWS YOU TO CHOOSE, FROM THE AVAILABLE LANGUAGES, WHAT LANGAUGE TEXT WILL BE DISPLAYED IN.
ALLOWS YOU TO SET EXERCISE FEEDBACK TO ENGLISH (MILES) OR METRIC (KILOMETERS) SYSTEM.
ALLOWS YOU TO SET YOUR CONSOLE TO BIKE MODE OR ELLIPTICAL MODE.
ALLOWS YOU TO VIEW THE TOTAL TIME IN HOURS AND TOTAL DISTANCE IN MILES OR KILOMETERS ACCUMULATED ON YOUR PRODUCT.
TEST USED BY SERVICE TECHNICIANS TO TEST LCD DISPLAYS.
TEST USED BY SERVICE TECHNICIANS TO TEST EDDIE CURRENT BRAKE SYSTEM.
ALLOWS YOU TO TURN THE BEEPER ON OR OFF.
ALLOWS SERVICE TECHNICIANS TO VIEW SOFTWARE VERSION USED BY CONSOLE.
•Use the UP ▲ and DOWN ▼ keys within each setting to change the setting.
•Press the ENTER key to save settings.
•To EXIT engineering mode, press and hold the START key for three seconds.
