A.Push the harness adjustment button
underthe seat flap. Pull the shoulder
strapsout to loosen the har ness .
B.From behind seat, pull the metal
junctionplate down behind the ownerÊs
manualpocket and remove the ends of
thetwo shoulder straps from the metal
junctionplate .
C.From front, pull straps through the
harness slots and then reinsert them
throughthe appropr iate slots.Both
harness straps must be through the
same set of slots in the seat and pad.
D.From behind seat, push both shoulder
strapsUNDER ownerÊs manual pocket
and out the bottom .
E.Depending on the size of your child, you
mayneed to adjust the harness straps or
waiststraps as shown on pages 23-24.
Reassemblethe strap ends onto the metal
junctionplate .You will be ableto use
variouscombinations of shoulder strap
loops and waiststrap loops to get a snug
fitfor your child.
5. SAFETY CHECK:
a)CHECK that straps are not twisted in front or back;
b)CHECK that straps are secure by pulling on harness
strapsfrom the front of the seat.
g
ra
c
o
b
a
b
y
c
o
m
Harness adjustment
button
Metal junction
plate
21