6.3 Installing the Infant Restraint/Base | |
Using Vehicle Belt |
|
You must carefully follow the instructions provided by your vehicle | |
manufacturer, in addition to the information in this manual. Before | |
proceeding, be sure you have read and understood section 5, | |
“Infant Restraint Location” on p. |
|
Make sure vehicle is on level ground so that | ➊ |
the level indicator, which is attached to the | |
infant restraint, can be used to properly |
|
recline the infant restraint ➊. |
|
If a front passenger seat is used, slide the |
|
vehicle seat rearward as far as possible |
|
from the dashboard. If a rear seat is used, |
|
make sure the seat in front of it is moved |
|
forward enough and is upright enough to |
|
allow room for the infant restraint. |
|
1. Remove infant restraint from base, |
|
regardless of whether or not you plan on using the base. | |
2. Place the base ➋ or infant restraint without base ➌ in a | |
➋ | ➌ |
30
