Graco PD169096A guide


	Notes
			Notes

66

67

Image 34

Graco PD169096A owner manual

Contents

Rgos Table of Contents Page Model Number Manufactured Purchase Date Register Your Child Restraint Features Assembling the Child Restraint Harness Strap Arm SlotPage AN Accident of ANY KIND. An accident Unsecured in Your VEHICLE. AnVery HOT if Left in the SUN. Contact with Damaged or Missing PARTS. Do not use Without Built-in Harness Height and Weight LimitationsWith Built-In Harness Your child must meet all requirements Without Back Support Choosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt RequirementsFor Built-in Harness Only ‡ Lap Belts with Automatic Locking Retractor ALR ‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in Harness To Install Locking ClipRepeat above steps until secure ‡ Combination LapShoulder Belt with Retractor Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Lap Belts Forward of Seat Crease What is LATCH? Latch Using Child Restraint with Built-in Harness Latch System Unbuckle harness straps œ Tighten vehicle seat belt Safety Check for Secure InstallationSecuring the Child Restraint in Your Vehicle Location, p With Latch Lay flat and not be twisted Securing Your Child in the Child Restraint ‡ Avoid bulky clothing Harness straps must be even with or Adjusting Head Support/Harness StrapsMust above the shoulders œ To prevent serious injury or death Check Harness SystemHarness Removal To use without built in harness Remove harness strapsPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Adjusting Head Support in Booster Mode Removing Back SupportPage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch Important points to remember To prevent ejection in sudden stop or crash Care and Maintenance Recline Foot To Remove Head Support and Seat Covers Bleach