4. | To create a secure installation, while | |
| pushing down on the base, pull the free |
|
| end of the lap belt or the shoulder portion |
|
| of the lap/shoulder belt to tighten . |
|
5. | Check that belt does not move by pulling |
|
| and pushing hard on base with hands near the |
|
| vehicle belt path. If belt loosens |
|
| or lengthens, repeat procedure. |
|
6. Push the infant restraint down into the base and make sure that you hear a “click” . Pull up on the infant restraint to be sure it
is latched securely into the base.
If the infant restraint does not securely latch | |
into the base, the infant restraint provides NO | |
protection for your child. DO NOT use the infant |
|
restraint/base if the infant restraint does not |
|
securely latch into the base. |
|
7. Test infant restraint for secure installation as described in infant restraint “Final Safety Check” page 42.
29
