Warning
WARNING
Fire, Explosion, and Electric Shock Hazard
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and result in a fire, explosion, or electric shock.
•Electrostatic equipment must be used only by trained, qualified personnel who understand the requirements in this manual.
•Ground the equipment, all personnel in or close to the spray area, the object being sprayed, and all conductive objects in the spray area. See “Grounding”, page 13.
•Check gun resistance daily. See “Test Gun Resistance” on page 19.
•If there is any static sparking while using the equipment, stop spraying immediately. Identify and correct the problem.
•Provide fresh air ventilation to avoid buildup of flammable or toxic vapors. Interlock the gun air supply to prevent operation unless ventilating fans are on. See “Ventilate the Spray Booth” on page 9.
•Use solvents that comply with local regulations. Flash point should be higher than 100°F (38°C).
•Do not flush with the gun electrostatics on. Do not turn on the gun electrostatics until all sol- vent is removed from the system.
•Keep the spray area free of debris and rags. Do not store solvent and flammable fluids in the spray area.
•Eliminate all ignition sources such as pilot lights, cigarettes, and static arcs from plastic drop cloths. Do not plug in or unplug power cords or turn lights on or off in the spray area.
•Use only
4 | 309295 |
