Mix’N Move™ Toys
Congratulations on your purchase of a Graco® product
with Mix ’N Move™ Toys!
Now your baby can enjoy an
Our goal is to make every product the best it can be! We are also committed to supporting our products after purchase. If you need replacement parts or would like to speak to Graco about your product, please contact our Customer Service Department at
To Install Toys
Step 1.
To use one of the toy mounts for the first time, you will need to remove the small plug which covers the toy mount.
Remove child from product before removing plugs.
With the aid of a screwdriver, carefully pry up one edge of the plug until it comes off.
Throw the plug away immediately; it is not reusable.
Step 2.
Insert the two prongs on the toy base into a toy mount at the notches.
Step 3.
Turn toy base 1/4 turn until you feel the toy snap into place. Check that toy is firmly inserted by pulling on the toy.
Toy is removable (turn it the other way with a little pressure) so that you can replace it with other toys when desired.
© 1998 Graco
