How to Properly

Use the Urban

Advantage Stroller

6.TO ADJUST THE KICKSTAND

!WARNING: IF THE CABLE IS NOT ADJUSTED PROPERLY OR THE KICKSTAND IS BENT OR BROKEN THE STABILITY OF THE STROLLER IN THE PARKED POSITION IS DIMINISHED. IN ALL EVENTS, NO CHILD SHOULD EVER BE LEFT UNATTENDED IN ANY STROLLER.

Turning the nut connected to the brake cable clockwise reduces the amount of force required to extend the kickstand. Turning the nut counter-clockwise increases the tension on the cable and adjusts the forward lean of the legs. (figure A)

The legs of the kickstand must be vertical when the unit is parked in order to be effective. Adjust the nut to keep legs in vertical position with the least amount of force required. The cable will require re- adjusting over time as parts wear.

There should approximately 1/2" to 1" clearance between the bottom of the kickstand and the ground. This allows for lower air pressure in tires and/or heavier children.

6. OPTIONS FOR USING THE CHILD TRAY

NOTE: Some parents may prefer not to install the child tray on the stroller as this option may allow easier accessibility to the child. (figure B & C)

Ex: Diaper changing or feeding. The child tray may be easily attached and removed by pulling off or snapping on each side to the frame of the stroller (just below the center lock on the frame and above the foot rest)

7. OPTIONS FOR USING THE SWIVEL WHEEL LOCK

TO LOCK FRONT SWIVEL: Adjust front wheel so that wheel is straight and lock is forward. Push lock to right. (figure D)

TO UNLOCK FRONT SWIVEL: Push lock to left.

NOTE: On rough surfaces, lock the wheel to keep straight. On smooth surfaces, unlock to allow the wheel to swivel.

Figure A

Figure B

Figure C

Figure D

10

HOW TO PROPERLY USE THE URBAN ADVANTAGE

 

 

Page 10
Image 10
Graco UA105 To Adjust the Kickstand, Options for Using the Child Tray, Options for Using the Swivel Wheel Lock