Assembly
Instructions
F ront wheel
1.Release locking latch. Unfold the stroller. Make sure both sides of the frame lock into place. Remove foam packing tubes from rear axle/ brake.
3.Remove foam pack- ing tubes from rear leg tubes on the frame. At- tach rear axle assembly onto rear leg tubes by inserting the left side a little bit and the insert- ing the right hand side. Press both of them together until the spring loaded buttons click into place.
2.Lean the stroller backwards with the
front forks pointing up. Inflate tires before assembly. Assemble the front wheel as shown. Tighten the lever on the axle until it is very close to contacting the fork then close the lever.
4.Remove plastic packing tubes from the rear wheel axle. Slide wheel onto axle and push until you hear a click. Make sure it is properly secure. Push down on spring Clip if necessary.
6 | ASSEMBLY INSTRUCTION |
|
|
