 
Accessories

USE ONL

Y

GENUINE GRACO

P

AR

TS AND ACCESSORIES
French 185–956
Spanish 185–961
German 186–041
Greek 186–045
Korean 186–049
English 185–953
Apply
other
language
here
DANGER
LABELS
The English language DANGER label shown on
page
1 is also on your
sprayer
. If you have painters
who
do not read English, order one of the following
labels to apply to your sprayer.
The drawing below
shows the best placement of these labels for good
visibility. Order the labels directly from Graco, free
of
charge.
T
oll Free:
1–800–328–0211
2 GPM PUMP KIT
238–053
1900 psi (13.2 MPa, 132 bar) Maximum Working Pressure
2
GPM PRESSURE CONTROL
REPLACEMENT KIT
238–115
1900 psi (13.2 MPa, 132 bar) Maximum Working Pressure
Installation
instructions are included with the kit.
DISPLACEMENT PUMP REP
AIR KIT
224–523
See contents on page 30. Repair instructions are in-
cluded
with the kit.
SPRA
Y ROLLER
224–470
4050 psi (27.6 MPa, 276 bar)
MAXIMUM WORKING PRESSURE
For
rolling roofing coatings that require back rolling, or for
use
in high wind conditions to minimize overspray
. Instal
-
lation
and and repair instructions included.
HIGH PRESSURE DISPLACEMENT PUMP
,
PRESSURE CONTROL, AND FIL
TER KIT
224–524
3000 psi (21.0 MPa, 210 bar)
MAXIMUM WORKING PRESSURE
Up to 1.25 GPM
Quickly
convert your Roof Rig to a system that will spray
architectural paints, acrylics, urethanes and bonding
adhesives. Maximum recommended tip size is 0.035.
Contact your distributor for help in determining when to
use
this kit. Installation and repair instructions included.
Requires
gun and hose (with spring guards on both ends)
rated for at least 3000 psi (21.0 MPa, 210 bar) working
pressure.
0416
HIGH
PRESSURE SPRAY HOSES
3000 psi (21.0 MPa, 210 bar)
MAXIMUM WORKING PRESSURE
214–705
3/8” ID, cpld 3/8 npt(m); 50 ft (15 m),
spring guards both ends
223–541
1/4” ID, cpld 1/4 npsm (f); 50 ft (15 m),
spring guards both ends
214–701
1/4” ID, cpld 1/4 npsm (f); 3 ft (0.9 m),
spring guards both ends
ADAPTERS
157–705
Union, 1/4 npt(m) x 3/8 npsm(f)
150–287 Adapter, 1/4 npt(m) x 3/8 npt(f)
156–173
Union, 3/8 npt(f) x 3/8 npsm(f)