WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARDEquipment
misuse can cause the equipment to rupture or malfunction and result in serious injury
.
This equipment is for professional use only
.
Read all instruction manuals, tags, and labels before operating the equipment.
Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor
.
Do not alter or modify this equipment. Use only genuine Graco parts.
Check equipment daily
. Repair or replace worn or damaged parts immediately
.
Do not exceed the maximum working pressure of the lowest rated system component. Refer to the
T
echnical Data
on page 39 for the maximum working pressure of this equipment.
Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the
Tech-
nical Data
section of all equipment manuals. Read the fluid and solvent manufacturer
’
s warnings.
Do not use hoses to pull equipment.
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose
Graco hoses to temperatures above 82
C (180
F) or below –40
C (–40
F).
Do not lift pressurized equipment.
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
W
ear hearing protection when operating this equipment.
Do not use 1,1,1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or
fluids containing such solvents in pressurized aluminum equipment. Such use could result in a
chemical reaction, with the possibility of explosion.
MOVING PARTS HAZARDMoving
parts can pinch or amputate your fingers.
Keep clear of all moving parts when starting or operating the sprayer
.
Before servicing the equipment, follow the
Pressure Relief Procedure
on page 8 to prevent the
equipment from starting unexpectedly
.