INSTALLATION
PREPARING FOR USE
Operating instructions and safety warnings are given in separate manual
CONNECTING HOSES
Connect fluid hose t o nippleonoutlet manifold. Do not use thread sealer. Connect spray gun t o swivel.
NEVER exceed 120 psi (8 bar) air pressure t o pump. At 120 psi, the pump develops up to 3600 psi (248 bar) fluid pressure. Besure that any hose. valve, etc., that you use will withstand the pressuresdeveloDed.
Connect a 112 ID staticgrounded air hose to the 112 npt air inlet union. You should have a bleed type master airyalve in your air supply line so that youcan shut off air before it reaches unit.
Flush unit as described in ary unit, install the filter
Troubleshooting andservice instructions are given in 306-
997and the separate manualsfor each component assembly.
