Installation

Typical Installation ± Cart Mount Model Shown

KEY

D E

APump

BBleed-Type Master Air Valve (required for pump)

CAir Supply Line

DMaster Air Valve (for accessories)

EAir Line Filter

FPump Air Regulator

GGun Air Regulator

HFluid Drain Valve (required)

JFluid Suction Line

KFluid Filter

LGun Fluid Supply Hose

MGun Air Supply Hose

NAir-Assisted Airless Spray Gun

PAir Line Lubricator

RFluid Intake Elbow

YGround Wire (required; see page 5 for installation instructions)

N

M

L

NOTE: Some components shown are included with the sprayer, depending on the model. Refer to the parts lists on pages 10±15 for parts included in your sprayer.

A

Y

G

M

L

F

B

P

C

K J

H

R

￿￿146

Fig. 4

Hose and Gun Connections

Refer to Fig. 4. Connect one end of the fluid hose (L) to the fluid filter (K) outlet and the other to the fluid inlet of the spray gun (N). Do not install the spray tip in the gun yet.

Close the bleed-type master air valve (B) and the air regulators (F, G). Connect a grounded air hose (M) between the outlet of the gun air regulator (G) and the air inlet of the spray gun (N). The pump air regulator

(F) is connected to the pump (A) with a hose (C).

6308±367

Page 6
Image 6
Graco Inc 236721, 308-367, 236723, 236722, 03289A Hose and Gun Connections, Typical Installation ± Cart Mount Model Shown