Assembling the Sprayer
Cart Mounted Pump
Assemble the suction hose (6) to the elbow (5) at the pump intake. Screw the suction tube (7) onto the other end of the hose. See Fig. 1.
4.Screw the elbow (22) into the pump air inlet, so the female threads face down. Apply sealant to both ends of the hose (23). Connect one end to the elbow (22), then connect the other end to the swivel (24) at the pump air regulator (F).
5.Unscrew the filter bowl (T) from the top cap (U). Apply sealant to the threads of the nipple (14) and install the nipple and top cap in the pump outlet. Lubricate the threads of the filter bowl (T) and screw it into the top cap (U) tightly.
6.Mount the wall bracket 5 ft (1.5 m) above the floor. Be sure the wall is strong enough to support the weight of the pump and accessories, fluid, hoses, and stress caused during pump operation. Refer to manual 306±783 for further information.
7.Screw the suction kit swivel (13) onto the pump intake.
1 Apply thread sealant.
7
5
6
G 25 | 7 | |
29 | ||
| ||
| S F 25 | |
| 14 | |
36 | 1 | |
| ||
34 |
| |
30 |
| |
| 24 | |
| U | |
| T |
22
1
23
1
13
Fig. 1
56
Wall Mount Pump
1.Screw the gauges (25) into the air regulators (F, G). See Fig. 2.
2.Connect the nipple (34) and bleed valve (30) to the swivel (36).
3.Install the air manifold assembly (S) to the wall bracket (7) using the two screws (29).
57
Fig. 2
Pail Mounted Pump
The pail mounted pump is shipped completely as- sembled.