Table of ContentsSymbols
Warnings
......................................
2
Setup.. .......................................
4
System Component Information ..................
6
Operation .....................................
8
Flushing
.....................................
IO
Parts
........................................
12
Technical Data ................................
16
Warranty.. ...................................
16
Grace
Phone Number ..........................
16

Warning Symbol

This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.

Caution Symbol

A CAUTION
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.

PRESSURIZED FLUID HAZARD

Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin
and cause serious injury.
l
Do not stop or deflect fluid leaks with your hand, body, glove, or rag.
l
Follow the Pressure relief procedure on page 8 before cleaning, checking, or servicing the
equipment.
l
Tighten ail fluid connections before each use.
l
Check the hoses, tubes, and couplings daily. Replace parts immediately if worn, damaged or
loose. Permanently coupled hoses cannot be repaired.
l
Handle and route hoses and tubes carefully. Keep the hoses and tubes away from moving parts
and hot surfaces. Do not use the hoses to pull equipment. Do not expose
Grace
hoses to tem-
peratures above
18Q°F
(82°C) or below -40°F (-40°C).
m

FiRE

AND EXPLOSION HAZARD

Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition
and result in a fire or explosion and serious injury.
l
Ground the equipment and the object being sprayed. See Grounding the System on page 5.
l
If there is any static sparking while using the equipment, stop spraying immediately. Identify
and correct the problem.
l
Provide fresh air ventilation to avoid the buildup of flammable vapors from the solvent or the fluid
being sprayed.
l
Do not smoke in the spray area.
l
Extinguish all open flames or pilot lights in the spray area.
l
Do not turn on or off any light switch in the spray area.
l
Electrically disconnect ail equtpment in the spray area.
l
Keep the spray area free of debris, including soivent, rags, and gasoline.
l
Do not operate a gasoline engine in the spray area.
.
2308-448