Repair

Packing Rod Repair

You may replace the packing rod as individual parts or as an assembly. The assembly is pre-adjusted at the factory.

Before installing the fluid packing rod into the gun barrel, make sure the internal surfaces of the barrel are clean. Remove any residue with a soft brush or cloth. Check the inside of the barrel for marks from high voltage arc- ing. If marks are present, replace the barrel.

To assemble the individual parts:

1.Place the packing nut (26e) and seal (26b**) on the fluid rod (26h). Flats on the packing nut must face the back of the fluid rod. The seal o-ring must face away from the packing nut. See FIG. 12.

2.Fill the inner cavity of the spacer (26g**) with dielec- tric grease (40). Place the spacer on the fluid rod (26h) in the direction shown. Generously apply dielectric grease to the outside of the spacer.

3.Place the fluid packing (26c**), rod packing (26d**), and housing (26f) on the packing rod (26h) .

4.Lightly tighten the packing nut (26e). The packing nut is properly tightened when there is 3 lb (13.3 N) of drag force when sliding the packing housing (26f) assembly along the rod. Tighten or loosen the pack- ing nut as needed.

5.Install the o-ring (26a**) on the outside of housing (26f). Lubricate the o-ring with non-silicone grease, Part No. 111265. Do not over-lubricate.

6.Install the spring (4) against the nut (E) as shown.

7.Install the packing rod assembly (26) into the gun barrel. Using the multi-tool (37), tighten the assem- bly until just snug.

8.Install the trigger (30) and screws (8).

9.Install the electrode, page 26.

10.Install the nozzle and air cap, page 25.

11.Test gun resistance, page 17.

4

E

26h

TI1550A

26e

**26b

**26g

**26c

**26d

26f

**26a

Fig. 12. Packing Rod

28

309291P

Page 27 Page 29
Page 28
Image 28
Graco Inc 309291P, 244399 important safety instructions Packing Rod Repair
Page 27 Page 29

309291P, 244399 specifications

Graco Inc, a leading manufacturer in fluid handling systems and products, is known for its innovative solutions in various industries including automotive, construction, and industrial manufacturing. Among its compelling offerings are the models 244399 and 309291P, which represent the pinnacle of Graco's engineering prowess and customer-focused design.

The Graco 244399 is a robust fluid-handling pump designed specifically for transferring and dispensing a variety of fluids. Crafted with durability in mind, it features an air-operated diaphragm pump mechanism that ensures consistent performance in demanding environments. Its design incorporates a lightweight composite structure, making it easy to transport and install. The pump is capable of handling a wide range of fluids, including paints, coatings, and chemicals, making it versatile for different applications.

One of the standout features of the 244399 is its adjustable flow rate, allowing operators to customize the output based on specific project requirements. The self-priming capability enhances its usability, ensuring that it can effectively siphon fluids from containers without the need for additional equipment. The rugged construction provides resistance against wear and tear, further extending the lifespan of the pump.

On the other hand, the Graco 309291P is recognized for its advanced technology in spray gun performance. This model boasts a lightweight design and is engineered to reduce operator fatigue during prolonged use. The 309291P includes a patented tip technology that optimizes spray patterns and improves transfer efficiency, allowing users to achieve a smoother, more consistent finish. It is compatible with a variety of materials, from stains to thicker coatings, demonstrating its flexibility to meet varying user needs.

Both models incorporate Graco’s commitment to safety, featuring integrated pressure relief mechanisms that enhance operator protection. Furthermore, they are designed for easy maintenance, with user-friendly access points for routine inspections and part replacements.

In conclusion, Graco Inc’s 244399 and 309291P highlight the company’s dedication to providing high-quality, innovative solutions for fluid handling and application. With their superior features, advanced technologies, and user-centric designs, these models continue to set standards in performance and reliability across various industries.
Top Page Image Contents