Operating Instructions
Parts
This manual contains important warnings and information.
READ AND KEEP FOR REFERENCE.
INSTRUCTIONS
Pressure Roller Attachment
Model 245907, Series C
D9 in. (23 cm) roller frame with 45_ angle and 12 in. reach
D1/2 in. (13 mm) nap roller cover
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure *
*The best operating pressure is the lowest pressure that provides an even paint supply to the roller and typically does not exceed 300 psi (2.1 MPa, 21 bar).
CAUTION
Never leave water in the pump, gun, or pressure roller. Doing so could cause corrosion and damage from freezing. For storage, flush the system with Graco Pump Armort or mineral spirits/paint thinner.
309511
Rev. D
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
ECOPYRIGHT 2002, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
