16
17a 1
17b 1
15
1Always replace the gasket and
seat (included with tip) when you replace a worn spray tip. See
Installing Tip (16) and Guard | 2 19 |
(15) on Gun, page 2. |
2Clean the spray gun fluid filter
with compatible solvent and a
brush every time you flush the
system.ti8920a
Ref |
|
|
|
No. | Part. No. | Description | Qty |
15 | 237859 | GUARD, RAC IV; | 1 |
|
| 7/8 in. (22 mm) thread |
|
16 | 221515 | TIP, spray, 515, 0.015 in. (0.381 mm) | 1 |
|
| orifice; |
|
|
| (includes 17a and 17b) |
|
17 | 243004 | KIT, repair, gasket (includes 17a to 17b) | 1 |
17a |
| GASKET, tip, black rubber | 1 |
17b |
| SEAT, cylinder | 1 |
19 | 288748 | FILTER, | 1 |
Maintenance
WARNING
Before performing any maintenance on gun, read all warnings on front cover of this manual and relieve pressure.
Cleaning/Replacing Filter (19)
1.Relieve pressure. Set trigger lock.
2.Unscrew hose from gun at gun swivel.
3.Remove filter (19).
4.Clean filter. Use a soft brush to loosen and remove excess debris.
5.Insert clean filter into handle.
Cleanup
CAUTION
•Never soak gun in solvent.
•Do not leave the gun or any parts in water or clean- ing solvents.
Flush gun after each work shift and store in a dry location.
To clean the handle grip, use water and a brush. For tougher stains, use a rag wetted in paint thinner or mineral spirits to scrub off paint. Do not operate until solvents have evaporated. To preserve life of the handle grip, do not stretch or pull grip from edges
311977C | 3 |
