Startup
1.Place suction tube and drain tube in grounded metal pail partially filled with flushing fluid. Attach ground wire to pail and to earth ground.
ti14844a
2.Turn prime valve down to DRAIN position. Turn pressure control counterclockwise to lowest pres- sure.
ti5789a
ti14842a
3. Set pump switch OFF.
ti5790a
4.Start Engine
a. Move fuel valve to open.
ti5248a
Startup
c.Set throttle to fast.
ti5250a
d. Set engine switch to ON.
ti5262a
5. Pull rope to start engine.
ti5263a
6.Increase pressure enough to start pump stroking and allow fluid to circulate for 15 seconds; turn pres- sure down and turn prime valve forward to SPRAY position.
15
SEC 
ti5794a
ti14845a
b.Move choke to closed.
ti5249a
7. Take spray gun trigger safety OFF.
ti10167a
3A0242A | 7 |
