Info: The low battery symbol will also appear at this time while the monitor checks the power level. This does not indicate that the batteries are low unless the low battery symbol remains on continuously.
3.After "0" displays, pressurize the cuff by squeezing the bulb until the pressure value displayed is 50mmHg above your usual systolic pressure. If you do not know your usual systolic pressure, squeeze the bulb just until 200mmHg displays.
4.The cuff will automatically deflate after you stop pressurizing the cuff. If an upward arrow symbol displays, you must inflate the cuff to a higher pressure than you did the first time. If an upward arrow does not display, the monitor is taking your measurement. Remain calm and still to avoid causing any measurement error.
5.The systolic pressure, diastolic pressure, and pulse will display in the format shown at right. The device will completely deflate when measurement is finished. To accelerate deflation, press the exhaust valve button.
Systolic Diastolic
Pulse rate
Labtron Digital Blood Pressure Monitor | 10 |
