4.Insert the bottom wire of each Safety Guard (Parts List Item #3) through the hole on the burner post. Connect the Safety Guards together. See Fig. 4.
WARN ING
Any Safety Guard or other protective device removed for servicing the patio heater must be replaced prior to operat- ing the patio heater.
5.Attach the Cylinder Access Door (Parts List Item #7) to the patio heater base.
See Fig. 5.
Figure 4
REFLECTOR
GRID
SAFETY
GUARD
BURNER
ASSEMBLY
BASE_
Figure 5
REFLECTOR
\
SAFETh
GUARD
CYLINDER
EMITTER
GRID
BURNER ASSEMBLY
ACCESSDOOR ///-
BASE