Grandstream Networks 496 - page 19

HandyTone-496 User Manual Grandstream Networks, Inc.
19
DHCP IP Lease
Time: 120 (in units of hours, default is 120 hours or 5 days)
DM
Z
IP:
Port
Forwarding:
WAN port 0 LAN IP LAN port 0 Protocol UDP Only
WAN port 0 LAN IP LAN port 0 Protocol UDP Only
WAN port 0 LAN IP LAN port 0 Protocol UDP Only
WAN port 0 LAN IP LAN port 0 Protocol UDP Only
WAN port 0 LAN IP LAN port 0 Protocol UDP Only
WAN port 0 LAN IP LAN port 0 Protocol UDP Only
WAN port 0 LAN IP LAN port 0 Protocol UDP Only
WAN port 0 LAN IP LAN port 0 Protocol UDP Only
Update Cancel Reboot
All Rights Reserved Grandstream Networks, Inc. 2005
End User
Password This contains the password to access the Web Configuration Menu. This
field is case sensitive.
Web Port This is the device’s internal HTTP server port. Default is 80.
IP Address There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the Flash memory.) The
HandyTone ATA will acquire its IP address from the first DHCP server it
discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to be set. The
HandyTone will attempt to establish a PPPoE session if any of the PPPoE
fields is set.
- If Static IP mode is enabled, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are reset to zero by default.
DHCP hostname This option specifies the name of the client. This field is optional but may be
required by some Internet Service Providers. Default is blank.
DHCP domain This option specifies the domain name that client should use when resolving
hostnames via the Domain Name System. Default is blank.